B-17F/G Engine Set
for Revell kits

S.B.S. Model,
1/72 scale
S u m m a r y : |
Catalogue Number, Description and Price: |
S.B.S. Model Item No. SBS72089 - B-17F/G Engine Set
|
Scale: |
1/72 |
Contents & Media |
Eight parts in grey 3d printed resin; instructions. |
Review Type: |
First Look. |
Advantages: |
Beautifully detailed; perfectly cast; engine is printed as a single part with pushrods, ignition harness and other details in place; exhaust manifolds included on separate parts; noticeable upgrade to the Revell engine. |
Disadvantages: |
None noted. |
Conclusions: |
These beautifully detailed engines will add a new universe of detail to the front end of your Revell 1/72 scale B-17F or B-17G kits. Cleanup and assembly will be very straightforward. |
Reviewed by Brett Green

S.B.S Model has released a four-engine set for Revell's 1/72 scale B-17F and B-17G Flying Fortress kits.

The set is made up from eight 3d printed resin parts, but the small count does not imply any lack of detail. Quite the opposite in fact.
Four engines are provided.
The cylinder faces, pushrods, ignition harness, magnetos and more are moulded as a single piece for each engine.

Once the parts have been separated from the fine printing stems the engines will be ready for installation with no further preparation.

Printing quality is perfect too.
In additon to the single-piece engines, the set also supplies four sets of exhaust manifolds. These are printed as one piece each.

A small instruction sheet provides exact assembly sequence, referring back to the kit cowl flaps as required.

Painting directions are included.
These beautifully detailed engines will add a new universe of detail to the front end of your Revell 1/72 scale B-17F or B-17G kits. Cleanup and assembly will be very straightforward.
Highly Recommended.
Thanks to SBS Model for the samples
Review Text and Images Copyright © 2025 by Brett Green
Page Created 28 August, 2025
Last updated
29 August, 2025
Back to HyperScale Main Page
Back to Reviews Page

|